|本期目录/Table of Contents|

[1]潘松,李华峰,黄卫清,等.微型超声电机驱动及其优化研究[J].电机与控制学报,2011,(03):65-68.
 PAN Song,LI Hua-feng,HUANG Wei-qing.Research on micro-driver and its optimization for minitype USM[J].,2011,(03):65-68.
点击复制

微型超声电机驱动及其优化研究(PDF)
分享到:

《电机与控制学报》[ISSN:1007-449X/CN:23-1 408/TM]

卷:
期数:
2011年03
页码:
65-68
栏目:
出版日期:
2011-04-30

文章信息/Info

Title:
Research on micro-driver and its optimization for minitype USM
作者:
潘松; 李华峰; 黄卫清;
南京航空航天大学精密驱动研究所;
Author(s):
PAN Song; LI Hua-feng; HUANG Wei-qing
Precision Driving Laboratory; Nanjing University of Aeronautics and Astronautics; Nanjing 210016; China
关键词:
超声电机 压电陶瓷 驱动器 微型化 优化
Keywords:
ultrasonic motors piezoelectic ceramic driver miniature optimization
分类号:
TM359.9
DOI:
-
文献标志码:
A
摘要:
针对某微小型超声电机驱动要求,设计直流升压变换器,采用小型微控制器产生信号相位差90度的驱动信号。基于该微小型超声电机的电容性负载特性,采用RC放电回路设计了电机驱动电路,分析了驱动电路电压波形参数对驱动性能的影响,得到了最佳驱动电路参数。采用电路仿真软件对所设计的电路进行仿真验证。针对电机驱动电路工作中的低效率,进行优化设计,设计专用放电回路,并进行仿真和实验对比。实验结果发现优化后驱动电路消耗功率是优化前的52.2%,提高了驱动效率;将所设计的优化后的驱动器用于某微小型超声电机,电机运转良好。
Abstract:
In order to drive a minitype ultrasonic motor(USM),a direct current Booster was designed,and the two driving signals of the USM with phase difference 90° were generated by a micro-controller.A driving circuit with RC discharge circuit was presented based on the capacitive property of the USM,and the optimal drive signal parameters were got through circuit analysis.The presented circuit was evaluated through simulation.Optimization design was carried out for the driving circuit through an add-on circuit to i...

参考文献/References:

-

相似文献/References:

[1]张建桃,张铁民.超声电机伺服控制技术研究进展[J].电机与控制学报,2009,(06):879.
 ZHANG Jian-tao,ZHANG Tie-min.Development of servo control technique on ultrasonic motors[J].,2009,(03):879.
[2]李华峰,王红占,黄卫清,等.控制量独立可调的超声电机新型驱动器[J].电机与控制学报,2010,(09):88.
 LI Hua-feng,WANG Hong-zhan,HUANG Wei-qing.A novel ultrasonic motor driver with independently controllable variables[J].,2010,(03):88.
[3]王光庆,沈润杰,郭吉丰,等.行波型超声波电动机PZT极化分区优化设计方法[J].电机与控制学报,2011,(04):67.
 WANG Guang-qing,SHEN Run-jie,GUO Ji-feng.Optimal design of the PZT polarization pattern of the traveling-wave type ultrasonic motor[J].,2011,(03):67.
[4]张建桃,张铁民,梁莉,等.超声电机非线性建模和广义预测控制[J].电机与控制学报,2011,(06):50.
 ZHANG Jian-tao,ZHANG Tie-min,LIANG Li.Nonlinear modeling and generalized predictive control of ultrasonic motor[J].,2011,(03):50.
[5]程廷海,郭向东,包钢,等.中空柱状定子二阶弯振的旋转-直线超声电机[J].电机与控制学报,2013,(03):8.
 CHENG Ting-hai,GUO Xiang-dong,BAO Gang.Rotary-linear ultrasonic motor based on second bending vibration mode of hollow cylindrical stator[J].,2013,(03):8.
[6]朱华,吴文才,潘松,等. 多自由度超声电机驱动电路研究[J].电机与控制学报,2014,18(12):44.
 ZHU Hua,WU Wen-cai,PAN Song,et al. Study on driving circuit of multi degree offreedom ultrasonic motor[J].,2014,18(03):44.
[7]程廷海,王良,高焓,等. 多波长激振模式的螺纹副驱动型超声电机[J].电机与控制学报,2015,19(03):25.[doi:10. 15938/j. emc.2015.03.005]
 CHENG Ting-hai,WANG Liang,GAO Han,et al. Screw type ultrasonic motor utilizing multi-wavelength exciting mode[J].,2015,19(03):25.[doi:10. 15938/j. emc.2015.03.005]
[8]徐张凡,潘松,黄卫清.基于灵敏度函数塑形的超声电机驱动平台的数字内模控制器[J].电机与控制学报,2018,22(08):10.[doi:10.15938/j.emc.2018.08.002]
 XU Zhang-fan,PAN Song,HUANG Wei-qing.Digital internal module controller shaped by sensitivityfunction of platform driven by ultrasonic motor[J].,2018,22(03):10.[doi:10.15938/j.emc.2018.08.002]
[9]潘松,牛子杰.超声电机驱动的SGCMG 框架速度控制研究[J].电机与控制学报,2019,23(01):73.[doi:10.15938/j.emc.2019.01.009]
 PAN Song,NIU Zi-jie.Speed control of SGCMG driven by ultrasonic motor[J].,2019,23(03):73.[doi:10.15938/j.emc.2019.01.009]

备注/Memo

备注/Memo:
国家自然科学基金(508751235,0735002); 江苏省自然科学基金(BK2009373); 高等学校科技创新工程项目(708050); 南京航空航天大学基本科研业务费专项科研项目(NJ2010004)
更新日期/Last Update: 2011-07-13