|本期目录/Table of Contents|

[1]李兵强,林辉.新型面装式永磁同步电机高性能控制技术[J].电机与控制学报,2010,(02):1-6.
 LI Bing-qiang,LIN Hui.A novel high performance control method for surface-mounted permanent magnet synchronous motor[J].,2010,(02):1-6.
点击复制

新型面装式永磁同步电机高性能控制技术(PDF)
分享到:

《电机与控制学报》[ISSN:1007-449X/CN:23-1 408/TM]

卷:
期数:
2010年02
页码:
1-6
栏目:
出版日期:
2010-02-28

文章信息/Info

Title:
A novel high performance control method for surface-mounted permanent magnet synchronous motor
作者:
李兵强; 林辉
西北工业大学自动化学院
Author(s):
LI Bing-qiang; LIN Hui
School of Automation; Northwestern Polytechnical University; Xi’an 710072; China
关键词:
面装式永磁同步电机 矢量控制 直接转矩控制 Bang-Bang控制
Keywords:
surface-mounted permanent magnet synchronous motor vector control direct torque control Bang-Bang control
分类号:
TM341
DOI:
-
文献标志码:
A
摘要:
通过对面装式永磁同步电机矢量控制和直接转矩控制技术基本原理的对比分析,提出一种二者相结合的新型高性能控制技术。类似于矢量控制,其基本思想是对定子电流矢量进行解耦控制;类似于直接转矩控制,采用Bang-Bang控制器,通过选取合适的空间电压矢量来对定子电流励磁分量和转矩分量进行滞环调节,进而获得优异的转矩动态响应。该技术继承了矢量控制和直接转矩控制的优点并摒弃了各自的某些缺点,通过对三种控制技术仿真对比,表明基于该新型控制技术的面装式永磁同步电机控制系统静、动态性能优异,结构简单,计算量小,鲁棒性强。
Abstract:
A novel high performance control method was proposed based on the comparison between the basic principles of vector control(VC)and direct torque control(DTC)for surface-mounted permanent magnet synchronous motor(SPMSM).Similar to VC,the basic idea was the decoupling control of stator current vector.Similar to DTC,with two Bang-Bang controllers,the excitation component and torque component of stator current were regulated through the selection of appropriate space voltage vectors,and then excellent torque dy...

参考文献/References:

-

相似文献/References:

[1]王艳敏,冯勇,陆启良.永磁同步电动机的无抖振滑模控制系统设计[J].电机与控制学报,2008,(05):514.
 WANG Yan-min,FENG Yong,LU Qi-liang.Design of free-chattering sliding mode control systems for permanent magnet synchronous motor[J].,2008,(02):514.
[2]苏健勇,杨贵杰,李铁才.PMSM扩展状态滑模观测器及转子位置和速度估算[J].电机与控制学报,2008,(05):524.
 SU Jian-yong,YANG Gui-jie,LI Tie-cai.Extended state sliding mode observer of PMSM and estimation of rotor position plus speed[J].,2008,(02):524.
[3]刘思华,王英,胡广大.感应电机高性能鲁棒速度跟踪控制器设计[J].电机与控制学报,2008,(06):706.
 LIU Si-hua,WANG Ying,HU Guang-da.High performance robust speed-tracking controller design for induction motor[J].,2008,(02):706.
[4]宋科,刘卫国,骆光照,等.航空电驱动系统效率优化控制研究[J].电机与控制学报,2009,(04):471.
 SONG Ke,LIU Wei-guo,LUO Guang-zhao,et al.Efficiency optimization control for aero electric propulsion system[J].,2009,(02):471.
[5]周兆勇,王琳,漆亚梅,等.多轴伺服控制器的片上系统设计[J].电机与控制学报,2009,(04):553.
 ZHOU Zhao-yong,WANG Lin,QI Ya-mei,et al.System-on-chip design of multi-axis servo controller[J].,2009,(02):553.
[6]王高林,陈伟,杨荣峰,等.无速度传感器感应电机改进转子磁链观测器[J].电机与控制学报,2009,(05):638.
 WANG Gao-lin,CHEN Wei,YANG Rong-feng,et al.Improved rotor flux estimator for sensorless induction motor[J].,2009,(02):638.
[7]张平化,杨贵杰,李铁才,等.三相电压型PWM整流器的二自由度I-PD电压控制[J].电机与控制学报,2009,(05):667.
 ZHANG Ping-hua,YANG Gui-jie,LI Tie-cai.Two-degree-of-freedom I-PD voltage control of three-phase PWM VSR[J].,2009,(02):667.
[8]梅志千,张璇,王蕊,等.粘着控制中的交流永磁同步电机调速控制研究[J].电机与控制学报,2009,(06):867.
 MEI Zhi-qian,ZHANG Xuan,WANG Rui.Study on speed control system of permanent-magnet synchronous motor for re-adhesion control[J].,2009,(02):867.
[9]胡文斌,刘少培,张胜洲,等.电压解耦矢量控制型交流牵引平台[J].电机与控制学报,2009,(06):903.
 HU Wen-bin,LIU Shao-pei,ZHANG Sheng-zhou,et al.AC traction test platform controlled by voltage-decoupled vector control[J].,2009,(02):903.
[10]朱瑛,程明,花为,等.磁通切换永磁电机的空间矢量脉宽调制控制[J].电机与控制学报,2010,(03):45.
 ZHU Ying,CHENG Ming,HUA Wei,et al.Space-vector PWM control of flux-switching permanent magnet motor[J].,2010,(02):45.

备注/Memo

备注/Memo:
航空科学基金资助项目(2007ZC53036)
更新日期/Last Update: 2010-06-03