j.emc.2018.06.003]
点击复制

线圈前移式直线音圈电机的设计与分析罗(PDF)

分享到：

《电机与控制学报》[ISSN:1007-449X/CN:23-1 408/TM]

Author(s):: LUO Ci-yong; WANG Xiao-wei; SUN Jun; (State Key Laboratory of Power Transmission Equipment ＆ System Security and New Technology，Chongqing University，Chongqing 400044，China)

Keywords:: winding-forward type; voice coil motor; finite element simulation; thrust characteristic curve; thrust de

摘要:: 针对直线音圈电机出力密度不高的问题，提出了线圈前移式电机结构。通过改变电机出力特性曲线，使其向右移动到合适位置，从而获得更大的平均出力密度以及更小的推力波动。采用磁路分析法推导该线圈前移式直线音圈电机在工作行程范围内的出力表达式，并分析其出力特性曲线。此外，通过有限元法仿真研究音圈电机的音圈前移量对电机平均出力的变化规律，从而分析确定前移量的理论优化值。最后，在理论与仿真的基础上，制作了实验样机，实验结果表明该样机的出力特性曲线与理论仿真结果基本一致，证明了线圈前移式结构在提高直线音圈电机平均出力和出力密度方面具有非常重要的意义。

Abstract:: A winding-forward linear voice coil motor ( VCM) is presented to overcome its lower thrustdensity． In order to obtain a higher average thrust density and a lower thrust ripple，the thrust character-istic curve of linear VCM was taken into account by moving it to the optimal position． Magnetic circuit a-nalysis was utilized to deduce the thrust formula of this winding-forward structure within the workingstroke，and the thrust characteristic curve was analyzed． Moreover，the variation of average thrust withrespect to the forward offset was analyzed by finite element method ( FEA)，and the optimal value of for-ward offset was obtained． Finally，the experimental prototype was made on the basis of theory and simula-tion analysis． The experimental results show that the thrust characteristic curve of the prototype is basical-ly consistent with the results of simulation，and play a great role in increasing the average thrust andthrust density of linear VCM．nsity

[1]王大彧,郭宏.采用DSP和FPGA直驱阀用音圈电机驱动控制系统[J].电机与控制学报,2011,(04):7.
　WANG Da-yu,GUO Hong.A DSP and FPGA based drive control system for voice coil motor used in direct drive valve[J].,2011,(06):7.

备注/Memo:: 收稿日期: 2016 － 07 － 26
基金项目: 国家自然科学基金( 51177177)
作者简介: 罗辞勇( 1973—) ，男，博士，副教授，研究方向为直线电机与电器、电力电子功率变换;
王晓伟( 1992—) ，男，硕士研究生，研究方向为直线电机优化设计、电力电子功率变换
;孙军( 1993—) ，男，硕士研究生，研究方向为直线电机优化设计。

更新日期/Last Update: 2018-07-02