|本期目录/Table of Contents|

[1]陈俊岐,赵洪,郑海峰,等. 椭圆聚焦型无极紫外固化灯研究与设计 [J].电机与控制学报,2017,21(08):109-113.[doi:10.15938 /j.emc.2017.08.015]
 CHEN Jun-qi,ZHAO Hong,ZHENG Hai-feng,et al. Research and design of electrodeless UV curing lamp with elliptic concentrator [J].,2017,21(08):109-113.[doi:10.15938 /j.emc.2017.08.015]
点击复制

 椭圆聚焦型无极紫外固化灯研究与设计
()
分享到:

《电机与控制学报》[ISSN:1007-449X/CN:23-1 408/TM]

卷:
21
期数:
2017年08
页码:
109-113
栏目:
出版日期:
2018-01-01

文章信息/Info

Title:
 Research and design of electrodeless UV curing lamp with elliptic concentrator
作者:
 陈俊岐1 赵洪1 郑海峰2 陈春铭2 李迎12 孙崐3
 ( 1.哈尔滨理工大学 工程电介质及其应用教育部重点实验室,黑龙江 哈尔滨 150080; 2. 哈尔滨哈普电气技术有限责任公司,黑龙江 哈尔滨 150040; 3.哈尔滨理工大学 测控技术与通信工程学院,黑龙江 哈尔滨 150080)
Author(s):
 CHEN Jun-qi 1 ZHAO Hong 1 ZHENG Hai-feng 2 CHEN Chun-ming 2 LI Ying 12 SUN Kun 3
 ( 1.Key Laboratory of Engineering Dielectrics and Its Application,Ministry of Education,Harbin University of Science and Technology,Harbin 150080,China; 2.Harbin Hapro Electric Technology Co.,Ltd,Harbin 150040,China; 3.School of Measurement-control Technology and Communications Engineering,Harbin University of Science and Technology,Harbin 150080,China)
关键词:
无极紫外固化灯 光线追迹法 谐振腔 椭圆聚焦 电磁共振 非理想光源
Keywords:
electrodeless UV curing lamp ray tracing method resonant cavity ellipse focusing electromagnetic resonance non-ideal light source
分类号:
O 435
DOI:
10.15938 /j.emc.2017.08.015
文献标志码:
A
摘要:
利用蒙特卡洛分析法和有限积分法,设计一种椭圆聚焦型无极紫外固化灯。首先利用光学 仿真软件分析了椭圆柱型谐振腔对非理想圆柱光源的光线利用率和光斑宽度两者之间的影响,选 择合适的放大倍率和离心率; 再通过电磁场仿真软件分析了谐振腔的电磁共振模式及频率,确定最
佳电磁共振条件下谐振腔的开口深度; 最后根据波导耦合原则,设计谐振腔与波导的耦合方式。经 实验测试,无极紫外固化灯的发射光谱与所用无极紫外放电灯管的理论光谱相一致,并且测得的紫 外光功率分布也与光学仿真的结果符合。
Abstract:
 An electrodeless ultraviolet curing lamp with elliptic concentrator was developed by using monte carlo and finite integration method. Firstly,the light efficiency and spot width of non-ideal cylindrical light source caused by reflection of elliptical resonant cavity were analyzed by the optical simulation software TracePro,and then the magnification and eccentricity of elliptical resonant cavity were preferred.On the basis of resonance mode and its frequency of resonant cavity investigated by electromagnetic
simulation software CST,the depth of microwave cavity was determined to satisfy the best condition of electromagnetic resonance.The microwave feed-in method of resonant cavity was designed in accordance with the principle of waveguide-coupled-cavity. The emission spectrum of electrodeless UV curing lamp presented by this article is agreed with the theoretical spectra of electrodeless UV discharge lamp in experiment test,and UV irradiation intensity distribution in the second focus plane accords with optical simulation results.

参考文献/References:

相似文献/References:

备注/Memo

备注/Memo:
 收稿日期: 2017-03-07
基金项目: 国家高技术研究发展计划( 863 计划) ( 2013AA070302)
作者简介: 陈俊岐( 1988—) ,男,博士研究生,研究方向为聚合物绝缘理论及测试技术;
赵 洪( 1955—) ,男,博士,教授,博士生导师,研究方向为聚合物绝缘理论与绝缘测试技术;
郑海峰( 1985—) ,男,硕士,助理工程师,研究方向为橡塑类测试技术;
陈春铭( 1985—) ,男,硕士,助理工程师,研究方向为橡塑类测试技术;
李 迎( 1969—) ,男,学士,高级工程师,研究方向为橡塑类测试技术;
孙 ( 1982—) ,男,博士,副教授,研究方向为多光谱测温、温度场重构、光谱信息测量。
更新日期/Last Update: 2017-11-20