|本期目录/Table of Contents|

[1]孟大伟,庞向东,潘波,等.YKK系列高效高压三相异步电动机的优化设计[J].电机与控制学报,2010,(04):31-35.
 MENG Da-wei,PANG Xiang-dong,PAN Bo,et al.Optimal design for the induction motors with high-efficiency and high-voltage of YKK series[J].,2010,(04):31-35.
点击复制

YKK系列高效高压三相异步电动机的优化设计(PDF)
分享到:

《电机与控制学报》[ISSN:1007-449X/CN:23-1 408/TM]

卷:
期数:
2010年04
页码:
31-35
栏目:
出版日期:
2010-04-30

文章信息/Info

Title:
Optimal design for the induction motors with high-efficiency and high-voltage of YKK series
作者:
孟大伟; 庞向东; 潘波; 赵勇;
哈尔滨理工大学电气与电子工程学院; 佳木斯电机股份有限公司技术部;
Author(s):
MENG Da-wei1; PANG Xiang-dong1; PAN Bo2; ZHAO Yong2
1.College of Electrical and Electronic Engineering; Harbin University of Science and Technology; Harbin 150040; China; 2.Jiamusi Electric Machinery Co.Ltd; Jiamusi 154002; China
关键词:
高效电机 优化设计 模拟退火算法 高压电机
Keywords:
high efficiency motors optimal design Simulated Annealing Algorithm high-voltage motors
分类号:
TM343.2
DOI:
-
文献标志码:
A
摘要:
按多规格电机共冲片的设计原则,以追求各规格电机的有效材料成本最低和运行效率最高为混合目标,建立了适用于系列电机优化设计的数学模型。结合电机设计的工程实际,对模拟退火算法进行了适应性的改进。应用所建立的模型和改进算法,对新型YKK系列中型高效高压电机进行了整体优化。计算结果表明,整个系列内各规格电机的效率都提高了1%以上,达到或超过高效电机标准。同时新系列型谱中不仅电机的规格数和容量有所拓展,与原系列相比相同容量的电机被安置在更低的中心高内,电机有效材料的用量也平均减少20%以上。即使考虑到新设计采用了好的导电、导磁和绝缘材料,优化设计的效果还是显而易见的。优化设计结果已经用于实际生产。
Abstract:
The mathematic model was established which is suitable for the optimal design of series motors according to the design rule in which several motors are of same core stamping.The lowest effective material cost and the highest efficiency for the every motor were taken for the mix objective.The Simulated Annealing Algorithm was improved in light of the engineering practice of the electric machine design.The integral optimization was made for the new induction motors with high efficiency and high voltage of YKK...

参考文献/References:

-

相似文献/References:

[1]刘爱民,林莘.断路器操动机构用直线感应电机的优化设计[J].电机与控制学报,2009,(04):528.
 LIU Ai-min,LIN Xin.Optimization design to linear induction motor used in circuit breaker operating mechanism[J].,2009,(04):528.
[2]罗宏浩,廖自力.永磁电机齿槽转矩的谐波分析与最小化设计[J].电机与控制学报,2010,(04):36.
 LUO Hong-hao,LIAO Zi-li.Harmonic analysis and minimization of cogging torque in permanent magnet motors[J].,2010,(04):36.
[3]李辉,许艮,杨亚丽,等.应用遗传算法辨识天窗驱动电机关键设计参数[J].电机与控制学报,2011,(03):1.
 LI Hui,XU Gen,YANG Ya-li.Identification for the key design parameters of sunroof driving motor by using genetic algorithm[J].,2011,(04):1.
[4]王光庆,沈润杰,郭吉丰,等.行波型超声波电动机PZT极化分区优化设计方法[J].电机与控制学报,2011,(04):67.
 WANG Guang-qing,SHEN Run-jie,GUO Ji-feng.Optimal design of the PZT polarization pattern of the traveling-wave type ultrasonic motor[J].,2011,(04):67.
[5]项倩雯,孙玉坤,张新华,等.磁悬浮开关磁阻电机建模与参数优化设计[J].电机与控制学报,2011,(04):74.
 XIANG Qian-wen,SUN Yu-kun,ZHANG Xin-hua.Modeling and parameters optimal design of bearingless switched reluctance motor[J].,2011,(04):74.
[6]周云龙,衣得武,高云鹏,等.用于气液两相流流型识别的ECT传感器的优化设计[J].电机与控制学报,2011,(06):62.
 ZHOU Yun-long,YI De-wu,GAO Yun-peng.Optimal design of ECT sensor for gas-liquid two-phase flow pattern identification[J].,2011,(04):62.
[7]张维煜,朱熀秋.涡流效应对磁轴承参数设计的影响及优化设计[J].电机与控制学报,2012,(09):67.
 ZHANG Wei-yu,ZHU Huang-qiu.Influence of eddy effect to the parameter design and optimized design for magnetic bearing[J].,2012,(04):67.
[8]李瑞华.平动式啮合电动机优化设计方法[J].电机与控制学报,2013,(01):65.
 LI Rui-hua.Optimization design method for translational meshing motor[J].,2013,(04):65.
[9]张艳丽,夏斌,谢德馨,等.基于克里金插值技术的开关磁阻电机极面优化设计[J].电机与控制学报,2013,(03):56.
 ZHANG Yan-li,XIA Bin,XIE De-xin,et al.Optimum design of pole face of switched reluctance motor based on Kriging interpolation[J].,2013,(04):56.
[10]姜晓明,王岩,陈兴林,等.鲁棒迭代学习控制律的优化设计方法[J].电机与控制学报,2013,(03):110.
 JIANG Xiao-ming,WANG Yan,CHEN Xing-lin.Optimal design method of robust iterative learning control[J].,2013,(04):110.

备注/Memo

备注/Memo:
国家科技支撑计划重点项目(2008BAF34B04);; 黑龙江省科技攻关项目(GC07A501)
更新日期/Last Update: 2010-08-18