|本期目录/Table of Contents|

[1]司纪凯,汪旭东,陈昊,等.永磁直线同步电机出入端磁阻力齿槽分量分析[J].电机与控制学报,2008,(05):550-554.
 Ji kai,WANG Xu-dong,et al.Analysis of the slot-teeth component in permanent magnet linear synchronous motor at the outlet end[J].,2008,(05):550-554.
点击复制

永磁直线同步电机出入端磁阻力齿槽分量分析(PDF)
分享到:

《电机与控制学报》[ISSN:1007-449X/CN:23-1 408/TM]

卷:
期数:
2008年05
页码:
550-554
栏目:
出版日期:
2008-09-15

文章信息/Info

Title:
Analysis of the slot-teeth component in permanent magnet linear synchronous motor at the outlet end
作者:
司纪凯12汪旭东1陈昊2袁世鹰1焦留成3
1.河南理工大学 电气工程与自动化学院; 2.中国矿业大学 信电学院
Author(s):
Jikai1 2WANG Xu-dong1CHEN Hao2YUAN Shi-ying1JIAO Liu-cheng3
1. College of Electrical Engineering and Automation, Henan Polytechnic University; 2. School of Information and Electrical Engineering, China University of Mining and Technology,
关键词:
同步电机 永磁直线同步电机(PMLSM) 磁阻力齿槽分量 间接法 有限元法 出入端 端部半填槽槽形
Keywords:
synchronous motors permanent magnet linear synchronous motor the slotteeth component of detent force indirect method finite element method outlet end the end half-filled slots shape
分类号:
TM351
DOI:
-
文献标志码:
A
摘要:
采用有限元法及间接法对PMLSM的动子在出入端时的磁阻力的齿槽分量进行分析。实际物理模型的初级铁心被分解为不含齿槽和包含齿槽但不包括端部的两FEA模型;采用间接法研究PMLSM原始模型及改变PMLSM的端部半填槽槽形后对电机动子在出入端处磁阻力齿槽分量的影响和变化规律。将分析结果与实验数据进行了比较,验证了方法的正确性及有效性,为PMLSM的性能研究及电机设计提供了理论。
Abstract:
The finite element method and indirect method were used to analyze the slot-teeth component of detent force in PMLSM at the outlet end. The primary iron-core in the actual physical prototype was composed of the slot-teeth component and the end component of detent force FEA model, in which the indirect method was proposed to investigate the effect and vary law of the slot-teeth component of detent force at the outlet end of the origin model and change the end half-filled slots shape of PMLSM. By the comparison of analysis results and experimental data, the effection and validation of the method is verified, which is benefited to the design, optimum and performances analysis of the motor.

参考文献/References:

-

相似文献/References:

[1]侯利民,张化光,刘秀翀,等.永磁同步电机转子磁位自检测复合方法[J].电机与控制学报,2008,(05):498.
 HOU Li-min,ZHANG Hua-guang,LIU Xiu-chong,et al.Compound rotor position self-sensing method of PMSM[J].,2008,(05):498.
[2]杨玉波,王秀和,丁婷婷.一种削弱永磁同步电动机齿槽转矩的方法[J].电机与控制学报,2008,(05):520.
 YANG Yu-bo,WANG Xiu-he,DING Ting-ting.Method of reducing cogging torque of solid-rotor permanent magnet synchronous motors[J].,2008,(05):520.
[3]苏健勇,杨贵杰,李铁才.PMSM扩展状态滑模观测器及转子位置和速度估算[J].电机与控制学报,2008,(05):524.
 SU Jian-yong,YANG Gui-jie,LI Tie-cai.Extended state sliding mode observer of PMSM and estimation of rotor position plus speed[J].,2008,(05):524.
[4]葛琼璇,李耀华,孔力.位置信号延时对牵引力控制性能的影响分析[J].电机与控制学报,2008,(05):534.
 GE Qiong-xuan,LI Yao-hua,KONG Li.Influence of time-delay of position signal on the performance of the thrust control[J].,2008,(05):534.
[5]张凤阁,白海军,刘宇,等.永磁外转子爪极发电机的漏磁计算[J].电机与控制学报,2009,(04):548.
 ZHANG Feng-ge,BAI Hai-jun,LIU Yu,et al.Leakage magnetic calculation on claw pole machine with outer permanent magnet rotor[J].,2009,(05):548.
[6]吴轩钦,谭国俊,宋金梅,等.基于混合磁链观测器电励磁同步电机矢量控制[J].电机与控制学报,2010,(03):62.
 WU Xuan-qin,TAN Guo-jun,et al.Electrically excited synchronous motor vector control based on hybrid air gap flux estimator[J].,2010,(05):62.
[7]李兵强,林辉.面装式永磁同步电机增磁增矩负载角恒定控制[J].电机与控制学报,2010,(05):56.
 LI Bing-qiang/a>,LIN Hui.Torque increase by field-enhancing with constant load-angle control for SPMSM[J].,2010,(05):56.
[8]陈学珍,辜承林.组合转子同步电机稳定性探讨[J].电机与控制学报,2010,(12):41.
 CHEN Xue-zhen,GU Cheng-lin.Research on stability of hybrid rotor synchronous machine[J].,2010,(05):41.
[9]路义萍,丰帆,孙明琦,等.同步电机定子与气隙流场数值计算与分析[J].电机与控制学报,2011,(08):47.
 LU Yi-ping,FENG Fan,SUN Ming-qi,et al.Numerical calculation and analysis of fluid flow field of stator and air-gap of a synchronous machine[J].,2011,(05):47.
[10]路义萍,丰帆,王佐民,等.同步电机定子三维温度场数值模拟[J].电机与控制学报,2012,(03):42.
 LU Yi-ping,FENG Fan,WANG Zuo-min,et al.Numerical simulation of 3D temperature field for the stator of a synchronous machine[J].,2012,(05):42.

备注/Memo

备注/Memo:
基金项目:国家自然科学基金(60474043);河南省高等学校创新人才培养工程(2005126-23);河南省重点攻关(0223025300)
作者简介:司纪凯(1973-),男,博士生,主要研究方向为直线电机电磁场、理论及应用;
               汪旭东(1967-),男,教授,博士,主要研究方向为直线电机电磁场、理论、控制及应用;
               陈   昊(1969-),男,教授,博士生导师,主要研究方向为开关磁阻电机设计、控制及其优化;
               袁世鹰(1940-),男,教授,博士生导师,主要研究方向为直线电机理论、控制及其优化设计;
               焦留成(1950-),男,教授,博士生导师,主要研究方向为直线电机理论、控制及其优化设计。
更新日期/Last Update: 2008-12-12