|本期目录/Table of Contents|

[1]国建鸿,傅德平,李振国,等.大型蒸发冷却汽轮发电机定子绕组温度计算[J].电机与控制学报,2008,(05):509-513.
 GUO Jian-hong,FU De-ping,LI Zhen-guo,et al.Calculation of temperature distribution in the stator of larger evaporative cooling turbo-generator[J].,2008,(05):509-513.
点击复制

大型蒸发冷却汽轮发电机定子绕组温度计算(PDF)
分享到:

《电机与控制学报》[ISSN:1007-449X/CN:23-1 408/TM]

卷:
期数:
2008年05
页码:
509-513
栏目:
出版日期:
2008-09-15

文章信息/Info

Title:
Calculation of temperature distribution in the stator of larger evaporative cooling turbo-generator
作者:
国建鸿傅德平李振国熊斌
中国科学院电工研究所
Author(s):
GUO Jian-hongFU De-pingLI Zhen-guoXIONG Bin
Institute Electrical Engineering,Chinese Academy of Sciences
关键词:
汽轮发电机 蒸发冷却 内冷技术 两相流
Keywords:
turbo-generators evaporative cooling forced inner coolingl two phase transition
分类号:
TM301.4+1
DOI:
-
文献标志码:
A
摘要:
在介绍了利用汽化潜热进行热交换实现电机定子绕组蒸发冷却的工作原理基础上,说明了电机定子铁心采用全浸式与绕组强迫内冷结合的新型蒸发冷却技术,不仅其绕组温升低,而且冷却介质单一,可以为电机的运行提供安全、可靠和高效的绝缘环境及冷却效果。并以300MW汽轮发电机设计数据为依据,根据空心股线内部介质两相流动特性,对空心股线内介质两相流动阻力、蒸发点位置等参数进行计算,分析了定子绕组温度沿轴向温度分布情况以及负荷变化对温度的影响,将试验值进行对比分析,验证了蒸发冷却技术在汽轮发电机上应用的可行性,同时为进一步应用于大型发电机提供理论依据。
Abstract:
Evaporative cooling for turbin generator is an independent innovative technology developed in China. In this paper, the theory of evaporative cooling for the generator stator is explained, and the advantage of applying immersion and forced inner cooling type of evaporative cooling are fully discussed. The new technology featuring low temperature increasing and only one type of cooling medium is much safer, reliable and efficient. Moreover, according to the 300MW turbogenerator design specification, and based on the two phase fluxion of cooling medium in the hollow conductor, the calculation of the medium fluxion resistance and the evaporative point of the cooling medium in the hollow conductor are proposed. Analysis of the temperature distribution along the stator winding is carried out and calculation is compared with the experiment results to demonstrate the feasibility of the proposed calculation.

参考文献/References:

-

相似文献/References:

[1]梁艳萍,王鸿鹄,张建涛,等.空冷汽轮发电机端部电磁场与涡流损耗研究[J].电机与控制学报,2010,(01):29.
 LIANG Yan-ping,WANG Hong-hu,ZHANG Jian-tao,et al.Research of end fields and eddy current losses for air-cooling steam-turbo-generator[J].,2010,(05):29.
[2]刘晓芳,康锦萍,罗应立,等.汽轮发电机在饱和与磁场畸变时负载励磁电流计算的新方法[J].电机与控制学报,2010,(08):7.
 LIU Xiao-fang,KANG Jin-ping,LUO Ying-li,et al.[J].,2010,(05):7.
[3]焦晓霞,管春伟,李伟力,等.汽轮发电机不同冷却介质对定子传热特性的影响[J].电机与控制学报,2011,(02):54.
 JIAO Xiao-xia,GUAN Chun-wei,LI Wei-li,et al.Influences of different cooling medium in turbo-generator on stator heat transfer characteristics[J].,2011,(05):54.
[4]李伟力,孙宏丽,于海涛,等.汽轮发电机定子绕组异结构饱和参数与温度场计算[J].电机与控制学报,2011,(03):25.
 LI Wei-li,SUN Hong-li,YU Hai-tao.Calculation of saturation parameters and temperature field for turbo-generator stator winding with different structure[J].,2011,(05):25.
[5]何玉灵,万书亭,唐贵基,等.定子匝间短路对发电机并联支路环流特性的影响[J].电机与控制学报,2013,(03):1.
 HE Yu-ling,WAN Shu-ting,TANG Gui-ji,et al.Effects of stator interturn short circuit on the circulating current inside the parallel branch loop[J].,2013,(05):1.
[6]武玉才,李永刚,李和明,等. 复合故障下的汽轮发电机转子电磁力研究[J].电机与控制学报,2013,(06):1.
 WU Yu-cai,LI Yong-gang,LI He-ming,et al.[J].,2013,(05):1.
[7]梁艳萍,侯宇. 转子磁路结构对汽轮发电机同步电抗的影响[J].电机与控制学报,2013,(07):34.
 LIANG Yan-ping,HOU Yu.[J].,2013,(05):34.
[8]赵伟铎,刘玉新,杜博超,等. 大型汽轮发电机环形引线汽堵故障分析[J].电机与控制学报,2014,18(04):39.
 ZHAO Wei-duo,LIU Yu-xin,DU Bo-chao,et al. Analysis of steam blockage faults of large turbogenerator circular lead[J].,2014,18(05):39.
[9]李辉,陈耀君,李洋,等. 双馈风电场并网对汽轮发电机次同步振荡的影响[J].电机与控制学报,2015,19(06):47.[doi:10. 15938/j. emc.2015.06.008]
 LI Huil,CHEN Yao-jun,LI Yang,et al. Impact of DFIG-based wind farms interconnected to powergrid on subsynchronous oscillation of turbogenerator[J].,2015,19(05):47.[doi:10. 15938/j. emc.2015.06.008]
[10]吕艳玲,戈宝军. 大型汽轮发电机带负荷失磁模型建立与分析[J].电机与控制学报,2015,19(06):22.[doi:10. 15938/j. emc.2015.06.004]
 LV Yan-ling,GE Bao-jun. Model of large steam turbine generator with load loss ofexcitation and analysis of loss of excitation process[J].,2015,19(05):22.[doi:10. 15938/j. emc.2015.06.004]

备注/Memo

备注/Memo:
基金项目: 国家科技部“十一五”重点支撑项目(2006BAA02B01),作者简介: 国建鸿(1972-),女,副研究员,硕士,研究方向为蒸发冷却汽轮发电机温度场分析及系统控制;傅德平(1952-),男,高级工程师,研究方向为从汽轮发电机蒸发冷却技术;李振国 (1952-),男,助理研究员,硕士,研究方向为汽轮发电机蒸发冷却技术;熊斌 (1952-),男,助理研究员,硕士,研究方向为汽轮发电机蒸发冷却技术。
更新日期/Last Update: 2008-12-11